Armeg SDS Plus Brick Removing Chisel - Carbide Tipped

Hammers out the mortar around individual bricks or blocks to allow brick removal. Ideal for applications such as installing brick lights, air bricks, replacing damaged brickwork and cavity access etc. Carbide tipped for extended life, 6mm wide cutting edge. Minimises chance of brick damage.

Usage Information

Prior to using chisels, please ensure your machine has the ‘chisel only’ function as they are designed to be used on this function.

Before using this product the chuck shank should be thoroughly lubricated.

Minimal force should be applied when being used.

After using the product continuously for 10-15 minutes the chisel must be removed from the chuck and allowed to cool at room temperature. Never try to accelerate cooling of shanks by dipping in water as this can cause thermal shock, crack the chisel and cause early failure.

Lubrication must be re-applied before re-using.

Products can fail on the shank due to temperature build-up of 200°C.

Misuse of the product will decrease the maximum time usage significantly. Shank failure due to temperature build-up is not warranted.

Tech-Tips

• SDS Plus shanks should be greased prior to and during use. This reduces heat build-up which reduces wear on the chisel and the machine
• Prior to using chisels, please ensure your machine  has the ‘chisel only’ function as they are designed to be used on this function only